Table of Contents
Advertisement
C
Load the paper, and adjust the pa-
per guides to the sides of the pa-
per.
Important
Confirm the print side of the
OHP
transparencies.
OHP transparencies can be
printed on only the specific
side.
Note
Do not stack paper over the lim-
it mark. Otherwise a skew im-
age or a paper misfeed might
occur.
Set the paper after shuffling
through the sheets.
Load the paper face down onto
the tray.
When you set custom size or
thick paper in the bypass tray,
do not stack paper above the
lower limit mark of the bypass
tray.
D
Push down the paper guide lever.
Note
ZAEY220E
If the paper guide lever is not
pushed down, paper misfeed
might occur.
Some
E
Turn on the printer.
Reference
For more information on turn-
ing on the printer, see P.35
"Connecting the Power Cord".
F
Configure the paper feed unit di-
rection and the paper size.
Important
The paper size specified with
the printer driver overrides the
one specified here.
Reference
For more information on speci-
fying the bypass tray, see the
printer driver help.
For more information on load-
ing custom paper, see "Loading
Paper and other Media" in the
"Printer Reference".
A Press {Menu}.
The following message appears
on the panel display.
Main Menu:
Proof Print
Loading Paper
1
ZAEY250E
33
Advertisement
Table of Contents
