Table of Contents
Advertisement
General Information
Incoming Inspection
Incoming Inspection
Verify that the shipment is complete by referring to
Table
6-1.
Check for damage. The foam-lined storage case provides protection during shipping. Verify that this case
and its contents are not damaged.
If the case or any device appears damaged, or if the shipment is incomplete, contact Agilent
Technologies—see
"Contacting Agilent" on page
5-4. Agilent will arrange for repair or replacement of
incomplete or damaged shipments without waiting for a settlement from the transportation company.
When you send the kit or device to Agilent, include a service tag (found near the end of this manual) with
the following information:
• your company name and address
• the name of a technical contact person within your company, and the person's complete phone number
• the model number and serial number of the kit
• the part number and serial number of the device
• the type of service required
• a detailed description of the problem
1- 4
85056A
Advertisement
Table of Contents
Troubleshooting
