Final Shutdown; Shutting Down; Recommendations For Disassembly; Fluids To Be Recovered For Treatment - Carrier Aquaforce 30XAS Series Installation, Operation And Maintenance Instructions

12 - FINAL SHUTDOWN

12.1 - Shutting down

Separate the units from their energy sources, allow them to cool then drain them completely.

12.2 - Recommendations for disassembly

Use the original lifting equipment.
Sort the components according to their material for recycling or disposal, in accordance with regulations in force.
Check whether any part of the unit can be recycled for another purpose.

12.3 - Fluids to be recovered for treatment

• Refrigerant
• Heat-transfer fluid: depending on the installation, water, brine solution, etc.
• Compressor oil

12.4 - Materials to be recovered for recycling

• Steel
• Copper
• Aluminium
• Plastics
• Polyurethane foam (insulation)

12.5 - Waste Electrical and Electronic Equipment (WEEE)

At the end of its life, this equipment must be disassembled and contaminated fluids removed by professionals and processed via
approved channels for electrical and electronic equipment (WEEE).
37