Product Overview - Night Owl WNVR-NC Series Quick Setup Manual

Product Overview

NVR Rear View
7
GROUND
NOTE: The maximum number of cameras you can connect to your NVR will be determined
by the number of channels.
Audio Output – Allows for the connection of an amplified speaker.
1
VGA Output – Allows for a video connection. If the TV/Monitor does not have
2
an HDMI input but does have a VGA input, connect the VGA cable from the
VGA output port on the NVR to the VGA input port on your TV/Monitor. (VGA
cable not included)
HDMI Output – Allows for a video connection. If the TV/Monitor has an HDMI
3
input, connect the HDMI cable from the HDMI output port on the NVR to the
HDMI input port on your TV/Monitor.
RJ-45 (Ethernet) Port – Used to connect the NVR to your modem/router for
4
remote viewing. Please note your NVR comes with built-in Wi-Fi for the
cameras to transmit to the NVR. However, you will need to manually connect
the NVR to your modem/router to remotely view on a Smart Device or PC /
Mac ® .
USB Ports – Allow for the connection of a USB mouse and/or a USB flash
5
drive. Connect the included USB mouse to assist in navigating the NVR's
menu interface. Connect a USB flash drive to download video files from the
NVR for long term storage or sharing.
Power Input – Used to connect the included 12V DC power supply.
6
NVR Antenna Mount – For installation of two included NVR antennas.
7
QSG-WNVR-NC.indd 3
AUDIO VGA HDMI
OUTPUT
1 2 3
7
LAN USB POWER
12V
4 5 6
2018/12/24 09:47
2