SIP Business
8018 DeskPhone
1. Drill two holes on the wall
(separation=90mm, diameter=6mm).
2. Insert the fastener into the holes on
wall (P/N: 1AD007550003).
3. Fix the support with both screws and
adjust (P/N: 1 1AD007460003). The
support is used as a reference and
must be removeable.
3. Fix the support with the phone by 1
screw (P/N: 1AD204430001).
4. Connect cables through the hole on
support bottom side.
If your phone is equipped with the reversible
hook (beginning of 2020), improve the
stability of the handset (for example on
boats) by turning the hook on the phone as
shown in the following picture:
8AL90341ENACed01
5. Put the support on the back side of the phone.
6. Slide it from top side and make sure the 2
snaps are engaged on the shell.
2. Hang the assembled phone with support on
the wall (P/N: 1AB045210162).
50 /60