Alcatel-Lucent 8028s Premium DeskPhone User Manual page 35

SIP Business
First connection as remote working
When you connect your deskphone for the first time remotely, you are prompted to set a PIN code.
The PIN code is requested when you enter in the VPN configuration (submenus) or when you boot your
deskphone (depending on the VPN configuration).
The PIN code is retained during the session so that you can access the VPN configuration without
having to re-enter your PIN code until you exit the VPN configuration.
Before configuring your phone for remote working, check if you have all the information from your
administrator.
If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to enter letters.
To configure your deskphone:
•
Access to the VPN configuration (see above).
•
VPN Config
o
Enable VPN: you have to activate this option to use your deskphone for remote working.
o Server: enter the address of the VPN server.
o PSK: enter the pre-shared key to establish a secure connection with the VPN server. The
PSK can be unique for all remote workers on a same installation or can be specific to
each remote worker. In the first case, the VPN authentication has to be enabled.
o
IKE vers:
o
IKEv1 aggressive: select this option if IKEv1 is used.
o
Validate your choice.
•
VPN Auth
o
Use Authentification, User, Pass: activate this option if a logon to the VPN server
(username and password) is required. The VPN authentication can be disabled in case a
specific PSK is used for each remote worker.
o
Validate your choice.
•
VPN Pincod
o
Request Pin on
your deskphone. We recommend you activate this option.
o
Set new
o
Validate your choice.
•
VPN DM URL:
o Enter the VPN DM URL where the configuration file is stored.
o
Validate your choice.
•
VPN Default Settings:
o Restore default settings.
o
Validate your choice.
•
The deskphone restarts.
•
Enter the PIN code if you have selected the option
•
Validate.
•
Your deskphone is ready for remote working.
If you leave the PIN code request menu when the phone is starting, the phone will start without VPN
activated.
8AL90341ENACed01
enter the IKV version (IKEv1/IKEv2).
Boot: if this option is activated, the PIN code is required when you boot
Pincode: enter the new PIN code.
(Request Pin on Boot).
35 /60