Lexus RC 350 AWD 2019 Owner's Manual page 46

46
1-1. For safe use
mode. In lock mode, the belt cannot
be extended.
6
While pushing the child restraint
system into the rear seat, allow the
shoulder belt to retract until the
child restraint system is securely in
place.
After the shoulder belt has retracted to a
point where there is no slack in the belt,
pull the belt to check that it cannot be
extended.
7
If the child restraint has a top tether
strap, follow the child restraint man-
ufacturer's operation manual
regarding the installation, using the
top tether strap to latch onto the
top tether strap anchor. (P.50)
8
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
RC350AWD_RC350_RC300AWD_RC30
0_OM_(U)_1810
Booster seat
■
1
High back type: Remove the head
restraint if it interferes with your
child restraint system. (P.103)
2 Place the child restraint system on
the seat facing the front of the vehi-
cle.
Booster type

High back type

3
Sit the child in the child restraint
system. Fit the seat belt to the child
restraint system according to the
manufacturer's instructions and