that has been registered to the driv-
ing position, and then unlock and
open the driver's door using the
smart access system with push-but-
ton start or wireless remote control.
The driving position will move to the
recorded position (not including the steer-
ing wheel). However, the seat will move to
a position slightly behind the recorded
position in order to make entering the vehi-
cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the engine switch to ACCES-
SORY mode or IGNITION ON
mode, or fasten a seat belt.
The seat and steering wheel will move to
the recorded position.
■
Recalling the driving position using the
memory recall function
●
Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
●
If a door other than the driver's door is
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
Customization
■
Some functions can be customized.
(P.339)
RC350AWD_RC350_RC300AWD_RC30
0_OM_(U)_1810
3-3. Adjusting the seats
Head restraints
Head restraints are provided for all
seats.
WARNING
■
Head restraint precautions
Observe the following precautions
regarding the head restraints. Failure to
do so may result in death or serious
injury.
Use the head restraints designed for
●
each respective seat.
Adjust the head restraints to the cor-
●
rect position at all times.
●
After adjusting the head restraints,
push down on them and make sure
they are locked in position.
●
Do not drive with the head restraints
removed.
Adjusting a head restraint verti-
cally
Front seats
1
Up
Pull the head restraints up.
2
Down
Push the head restraint down while press-
ing the lock release button
103
3
.
A