274
7-1. Essential information
7-1.Essential information
Emergency flashers
The emergency flashers are used to
warn other drivers when the vehicle
has to be stopped on the road due
to a breakdown, etc.
Operating instructions
Press the switch to flash all of the turn
signal lights.
To turn them off, press the switch once
again.
Emergency flashers
■
If the emergency flashers are used for a
long time while the engine is not operating,
the battery may discharge.
RC350AWD_RC350_RC300AWD_RC30
0_OM_(U)_1810
If your vehicle has to be
stopped in an emergency
Only in an emergency, such as if it
becomes impossible to stop the
vehicle in the normal way, stop the
vehicle using the following proce-
dure:
Stopping the vehicle
1
Steadily step on the brake pedal
with both feet and firmly depress it.
Do not pump the brake pedal repeatedly
as this will increase the effort required to
slow the vehicle.
2
Shift the shift lever to N.
If the shift lever is shifted to N
3
After slowing down, stop the vehi-
cle in a safe place by the road.
4
Stop the engine.
If the shift lever cannot be shifted to
N
3
Keep depressing the brake pedal
with both feet to reduce vehicle
speed as much as possible.
4
To stop the engine, press and hold
the engine switch for 2 consecutive