Epson WorkForce Enterprise WF-M20590 Series User Manual page 106

User's Guide
Copies Set the number of copies you want to print.
Finishing Tab
Show Settings
Displays a list of items currently set on the Main, Finishing, and More Options tabs.
Reset Defaults Return all settings to their factory default values. The settings on the Main and More Options tabs
are also reset to their defaults.
Job Type Select whether to store print data on the printer.
Normal Print
Confidential Job
Verify Job
Re-Print Job
Authenticated Print
Paper Source Select the paper source from which the paper is fed. Select Auto Select to automatically select the
paper source selected in the Paper Setting on the printer.
If you select Set separately for each paper, you can select multiple paper sources for the pages in
your document. You can also select whether or not to print on the front cover and back cover.
Separator Sheet
Output Tray Select which output tray to use for printouts. The output tray may be automatically selected based
on other print settings.
Sort Select how to sort multiple copies.
Rotate Sort
Shift Sort
* Select the staple location.
Staple
Printing
Printing starts without storing.
Password-protect confidential documents when printing. If you use this
feature, the print data is stored in the printer and can only be printed
after the password has been entered using the printer's control panel.
Click Settings to change the settings.
When printing multiple copies, allows you to print one copy to check the
content. To print after making the second copy, operate the printer's
control panel.
Click Settings to set User Name and Job Name.
Allows you to store the print job in the printer's memory. You can start
printing by operating the printer's control panel.
Click Settings to set User Name and Job Name.
Protect confidential documents with authentication information when
printing. If you use this feature, the print data is stored in the printer and
can only be printed after the authentication information has been
entered using the printer's control panel.
This item is available only when Epson Print Admin Serverless printing is
enabled.
Select settings for inserting separator sheets between printouts.
Stacks printouts alternately in the portrait orientation and the landscape
orientation. To use this feature, select Auto Select as the Paper Source
setting and Auto Select or Face Down Tray as theOutput Tray setting.
The printouts are stacked in the face down tray.
* Offsets each set of copies. You can select this option only when you select
Finisher Tray as the Output Tray setting.
106