Setting The Date; Changing The Date Format; Setting The Correct Day Of The Week - Hach AquaTrend 51200 Instrument Manual

3.3.2 Setting the Date

3.3.3 Changing the Date Format

3.3.4 Setting the Correct Day of the Week

51350-18 Initial Aquatrend Setup.fm
1. Press the MENU key to access the Main Menu.
2. Use the up or down arrow key to move the pointer to AquaTrend Menu
and press ENTER.
3. Select the SET TIME/DATE option and press ENTER.
a. Select the SET DATE option and press ENTER.
b. A pop-up box will prompt you to enter the new date.
c. Press the up and down arrow keys to increment through the available
digits. Press the right or left arrow key to move to another character
field within the date.
d. When the proper date is displayed, press ENTER to accept or press
EXIT to cancel.
a. To change the date format, select DATE FORMAT from within
the Set Time/Date Menu. A pop-up box will appear requesting
SELECT DATE FORMAT.
b. Select the preferred date format – MM/DD/YY is month/day/year, and
DD/MM/YY is day/month/year.
The internal calendar programs the day of the week to correspond to the set
date. If it is necessary to change the day, proceed as follows:
a. To change the day of the week, select DAY from within the
SET TIME/DATE menu. To change the day setting, which shows the
current day of the week, select DAY.
b. Move the pointer to the correct day and press the ENTER key. The day
will move forward automatically with the clock at 24:00 hours.
Section 3
Page 25
Time/Date Setting