Table of Contents
Advertisement
MP DataLink menus
If there is a problem and the download process cannot begin during the timeout
period, MP DataLink displays a timeout error. If this happens, put the meter
back in the PC On mode and try again.
4.3.2
Set Date and Time
Use this command to set the date and time on the meter.
1.
Verify that the computer date and time are correct to make sure the setting is
accurate.
2.
Click the SET DATE AND TIME icon (or select this task from the MP
Commands menu) when the MP-Dock is connected and the meter is in the PC
On mode. The date and time status bar displays. MP DataLink takes the date
and time from the user's computer.
4.3.3
Erase Memory
Use this command to erase the data stored in the meter memory.
1.
Click the ERASE MEMORY icon (or select this option from the MP Commands
menu). When the MP-Dock is connected and the meter is in the PC On mode,
a prompt asks the user to confirm the decision to erase data from the meter
memory.
2.
Click OK to confirm.
39
Advertisement
Table of Contents
