Hach AquaTrend 51200 Instrument Manual page 59

Figure 19 Wall Mount for the Portable AquaTrend Interface
1/4-20 Screws
Wall Mount
51350-18 Hardware Installation.fm
4 Places
Bracket
For pole mounting:
1. Obtain two ¼-20 x 2.843 U-bolts and nuts (Cat. No. 51410-00).
2. Press the back of the mounting bracket against a pole in the proper
mounting position (indentations on the back of the bracket fit the pole
either horizontally or vertically).
3. Place the curve of one U-bolt behind the pole, and insert the threaded
ends of the bolt through two of the holes on the mounting frame. The
center holes are for vertical mounting and outside holes are for horizontal
mounting.
4. Secure the two nuts with a wrench, and repeat steps 1-3 for the
second U-bolt.
5. Fit the bracket lip into the slot on the back of the Portable AquaTrend
Interface and push down until the device fits securely in the bracket.
Portable AquaTrend
Portable AquaTrend Interface Installation and Mounting
Section 5
Page 59