Removing The Optional Internal Dual Sd Module - Dell E28S Series Owner's Manual

Procedure
1. Locate the SD card connector on the internal dual SD module. Orient the SD card
2. Press the card into the card slot to lock it into place.
After you finish
Follow the procedure listed in the After working inside your system section.

Removing the optional internal dual SD module

Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
appropriately and insert the contact-pin end of the card into the slot.
Note: The slot is keyed to ensure correct insertion of the card.
Figure 59 Installing an internal SD card
a. IDSDM
b. SD card 2
c. SD card 1
d. SD card slot 1
e. SD card slot 2
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Installing and removing system components
Dell PowerEdge R430 Owner's Manual
139