Dell E28S Series Owner's Manual page 60

Pre-operating system management applications
2. Click Boot Option Settings
3. Use the arrow keys to select a boot device, and use the plus (+) and minus (-) sign keys to
4. Click Exit, and then click Yes to save the settings on exit.
Network Settings
You can use the Network Settings screen to modify PXE device settings. The network settings
option is available only in the UEFI mode.
Viewing Network Settings
To view the Network Settings screen, perform the following steps:
Procedure
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Network Settings.
Network Settings screen details
The Network Settings screen details are explained as follows:
About this task
Option
Description
PXE Device n (n = 1 to 4)
PXE Device n Settings(n = 1 to 4)
UEFI iSCSI Settings
You can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option
is available only in the UEFI boot mode. BIOS does not control network settings in the BIOS boot
mode. For the BIOS boot mode, the option ROM of the network controller handles the network
settings.
Viewing UEFI iSCSI Settings
To view the UEFI iSCSI Settings screen, perform the following steps:
Procedure
1. Turn on, or restart your system.
Dell PowerEdge R430 Owner's Manual
60
move the device down or up in the order.
Note: The BIOS does not control network settings in the BIOS mode. For the BIOS boot mode,
the optional Boot ROM of the network controllers handles the network settings.
F2 = System Setup
Note: If your operating system begins to load before you press F2, wait for the system
to finish booting, and then restart your system and try again.
Enables or disables the device. When enabled, a UEFI boot option is created for the device.
Enables you to control the configuration of the PXE device.
Boot Sequence.
>