Meaning Of Safety Instructions And Warnings - Siemens SIPART PS2 6DR5020 Series Manual

Information for the Operator
0.2

Meaning of safety instructions and warnings

!
!
!
6
This manual is not a permanent part of the scope of supply. For
reasons of clarity, it does not contain every detail about every version
of the product described and cannot take every eventuality in installa-
tion, operation, maintenance and use in systems into account. If you
require further information or if problems occur that have not been dealt
with in sufficient detail in this document, please request the required
information from your local Siemens office or the office responsible for
you.
Functionality, commissioning and operation are described in this
manual.
Please pay special attention to the Warning and Note texts. These are
separated from the remaining text by horizontal lines and specially
marked with symbols (see Chapter 0.2).
Safety information and warnings are intended to avert danger from the
life and health of users and maintenance personnel and to prevent
material damage. They are highlighted in this manual by the headings
defined here. They are also marked by warning symbols next to where
they appear. The headings used have the following meaning for the
purposes of this manual and the product labels:
DANGER
indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
used with the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury.
CAUTION
used with the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury.
SIPART PS2 Manual
A5E00074631-01