Rheem 812 Series Owner's Manual And Installation Instructions page 32

TEMPERATURE CONTROL – DELUXE
BATHROOM CONTROLLERS – DELUXE
The Bathroom Deluxe controller(s) allows the user to select the temperature setting for the hot water to be
used in the bathroom. They have a minimum temperature setting of 37°C and a maximum temperature setting
of:

874 series

876 series
The Bathroom Deluxe controllers operate in tandem. Whenever an operation is selected on one Bathroom
Deluxe controller, it is also set on the other Bathroom Deluxe controller. The Bathroom Deluxe controllers
automatically have priority (PRIORITY light glows) if they are on.
Important: It is important to turn on the Bathroom Deluxe controller before opening a hot tap in the bathroom
(priority is gained automatically and the PRIORITY light glows). If the Bathroom Deluxe controller is not on and
the Kitchen Deluxe controller is on (will have priority and the PRIORITY light glows), then it is possible to
receive water at a temperature higher than expected from a hot tap in the bathroom. This temperature could
be up to:

874 series

876 series
Notes on the Bathroom Deluxe controllers:

The Deluxe controller cannot be turned on whilst a hot tap is open.

When a Bathroom Deluxe controller is turned on, it gains priority (PRIORITY light glows) from the Kitchen
°C
8 8
Deluxe controller.

The Bathroom Deluxe controller must be on in order to adjust the temperature setting on the Bathroom
X 10L
Deluxe controller.

The Kitchen Deluxe controller can be turned off from a Bathroom Deluxe controller.
Press and hold the on / off ( ) button on the Bathroom Deluxe controller for three seconds. This turns off
all the Deluxe controllers, including the Bath Fill function if it is on, the displays go blank and the lights go
out. If hot water is flowing from a hot tap, it will go cold.

Warning: It is advised to leave the Bathroom Deluxe controller on after hot water usage is finished in
the bathroom. Turning off a Bathroom Deluxe controller in one bathroom will also turn off the
Bathroom Deluxe controller in the other bathroom. The Kitchen Deluxe controller will gain priority
(PRIORITY light glows) if it is on and the temperature setting can be up to:
874 series

876 series

If a hot tap is open in another bathroom, the water will be delivered at: for an 874 series model – up to
50°C if a temperature limiting device is installed in the hot pipe to the bathroom or up to 60°C – AU or
55°C – NZ if a temperature limiting device is not installed; or for an 876 series model – up to 50°C.
BATH (l)
Rheem
50°C
50°C
50°C if a temperature limiting device is installed in the hot pipe to the bathroom
or up to 60°C – AU or 55°C – NZ if a temperature limiting device is not
installed.
50°C
60°C – AU 55°C – NZ
50°C
Bathroom Deluxe
Controller
°C
front cover
closed
front cover
open
32
BATH FILL
VOLUME
B1
Bath Fill
1. 2. 3. 4. 5.
Bath Bath
Open Bath Fill
Water Fill
hot tap completed
Volume Temp
(automatic)
Set Bath Fill Press Bath
Fill Button
Water Volume Bath Fill Button
and Temperature (Red light on) (Red light flashes)
Hot Water
1. 2. 3.
PRIORITY Adjust
Light on Temperature
Press
BATH FILL
TEMPERATURE
6. 7.
Close
hot tap
Press Bath
Fill Button
(Red light off)
4.
Open
hot tap