Rheem 812 Series Owner's Manual And Installation Instructions page 26

TEMPERATURE CONTROL – DELUXE
VOICE PROMPT AND OPERATING TONE
The Deluxe controllers have a series of voice prompts and operating tones which sound during certain
operations.
The voice prompts and operating tones sound from all Deluxe controllers, regardless of which Deluxe controller
is being operated at the time.
Voice Prompt
The voice prompts are:

When either the up () button or BATH FILL TEMPERATURE up () button is pressed
"hot water temperature has been increased"

When either the down () button or BATH FILL TEMPERATURE down () button is pressed
"hot water temperature has been decreased"

When the BATH FILL VOLUME up () button is pressed
8 8
"Caution, bath fill water volume has been increased, bath may overflow"

When the BATH FILL VOLUME down () button is pressed
10L
X
"bath fill water volume has been decreased"

When the bath fill (
8 8
"please set bath water volume and bath temperature, then open the hot water tap"

When the set bath fill water volume has been delivered from the water heater during the Bath Fill function
10L
X
"the bath is ready, please turn off the hot water tap and press the bath fill (
8 8

When the bath fill (
X
"bath filling has been stopped, please turn off the hot water tap and press the bath fill (
finish"

When the bath fill (
turned off
"please ensure the bath hot water tap is turned off"

When the Deluxe controllers have been turned off during the Bath Fill function
"bath filling has been stopped"

When the assistance call ( ) button is pressed
"assistance required, assistance required"
Operating Tone
The operating chime will sound when the temperature adjustment up () button or down () button is pressed
and the voice prompt is not speaking.
The operating beep will sound for each change in temperature increment when a BATH FILL TEMPERATURE
adjustment button is pressed or scrolled, whether the voice prompt is speaking or not.
The operating beep will sound for each change in volume increment when a BATH FILL VOLUME adjustment
button is pressed or scrolled and the voice prompt is not speaking.
°C
) button is pressed to turn on the Bath Fill function
°C
°C
) button is pressed to halt the Bath Fill function before it is complete
10L
) button is pressed to turn the Bath Fill function off and the hot tap has not been
°C
0
BATH (l)
8 8
26
°C
10L
X
°C
8 8
) button to finish"
10L
X
) button to