Yamaha Phazer Venture Lite PZ50MTA 2011 Supplementary Service Manual page 13

ENGINE OIL REPLACEMENT
• Apply a thin coat of engine oil onto the O-
ring
NOTICE
Make sure that the O-ring
correctly in the groove of the oil filter car-
tridge.
• Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
• Tighten the oil cooler bolts to specification.
13.Install:
• Drain bolts
(along with the new gaskets)
14.Fill:
• Engine oil
(with the specified amount of the recom-
mended engine oil)
Add 1.5 L (1.3 Imp.qt, 1.6 US qt) of the rec-
ommended engine oil to the oil tank, and
then install and tighten the oil level gauge/
dipstick and the cylinder head cap.
4
INSP
ADJ
of the new oil filter cartridge.
Oil filter cartridge:
17 Nm (1.7 m•kgf, 12 ft•lbf)
Oil cooler bolt:
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
®
LOCTITE
Oil tank engine oil drain bolt:
16 Nm (1.6 m•kgf, 12 ft•lbf)
Oil pan engine oil drain bolt:
30 Nm (3.0 m•kgf, 22 ft•lbf)
Quantity:
Total amount:
3.00 L (2.64 Imp.qt,
3.17 US qt)
Periodic oil change:
2.45 L (2.16 Imp.qt,
2.59 US qt)
With oil filter replacement:
2.63 L (2.31 Imp.qt,
2.78 US qt)
is positioned