Canon EOS 20D Service Manual page 42

14-4 Highlight alert:
14-5 Magnify zoom display
14-6 Index display
14-7 Rotated display:
14-8 Jump:
Note 1: If a JPEG image not in the DCF format is
selected, [!] is displayed.
Note 2: If an image that cannot be displayed is
selected, [?] is displayed.
In the single image (Info) display mode, the
highlight portions containing no image
information will blink.
With the Magnify button, the image can be
magnified from the single image display from
approx. 1.50 to 100 in 15 steps.
Magnify Magnify button
Reduce Reduce button
Scroll vertically
Multi-controller (Diagonal scrolling also possible.
Center button does not function.)
Scroll horizontally
Quick Control Dial, Main Dial
View next image (The previous or next image can be viewed while
the magnified position remains the same.)
* The image magnification will start at the center.
Single image display or press the Reduce button
for 9-image display
• View the previous/next image with the
Quick Control Dial or Main Dial.
1) Manual
(1) With the menu's "Image rotation," the
image can be rotated clockwise in 90º, 270º
and 0º.
(2) Images appended with original image
verification data can also be rotated.
2) Auto image rotation
(1) Settable with the menu's "Auto image
rotation."
(2) When a vertical image is played back in the
horizontal orientation, the camera rotates
the image automatically to the vertical
orientation.
(3) Image rotation is applied during playback
and video OUT (not during image review
after image capture).
1) With the Jump button, browse through
images during playback or switch the menu
category (Shooting, Playback, Setup)
2) Browsing the previous/next image during
playback works with (1) Single image, (2) 9-
image index, and (3) Magnified view as listed
in 14-1.
(1) For 1), turn the Main Dial or Quick Control
Dial to jump 10 images forward or back.
37
General Information