Canon EOS 20D Service Manual page 120

<Disassembly Procedure>
1) Grip rubber removal
Note that the grip rubber is reused.
2) Front cover removal
(1) Remove the 2 black screws and the 2 silver screws from the front and the
black screw from the bottom.
(2) Lift and remove the front cover.
Fig. 025
3) Main battery cover removal
(1) Slide the battery cover knob and remove the battery cover.
(2) Slide the lithium battery hold to remove.
(3) Remove the 2 screws and remove the hinge plate.
<Reassembly Cautions>
1) Nameplate attachment
Apply Super X as shown below.
Fig. 027
2) Grip tape attachment
3) Grip rubber attachment
Remove
(Description)
(Description)
13
Repair Information
Remove
Fig. 026
Attach the nameplate.
Fig. 028