Eos Capture - Canon EOS 20D Service Manual

1.4 EOS Capture

1) Overview of version 1.1
The 3 main differences between versions 1.0 and 1.1 are the addition of the
EOS 20D to the supported cameras, the addition of image rotation functions
(rotate 90 degrees right, rotate 90 degrees left and rotate 180 degrees), and the
modifications to the white balance compensation display.
Fig. 005 shows the main window and its main functions when the EOS 20D is
connected.
Shooting mode display
Color temperature display/setting
White Balance display/setting
Metering mode display/setting
Exposure compensation level
display/setting
Setting buttons
Drive mode display
Bracket shots display
Battery status display
Warning display
* Functions added or modified in version 1.1 are shown in red.
Fig. 005 EOS Capture main window when a EOS 20D is connected
In version 1.0, EOS Capture was installed in conjunction with EOS Viewer
Utility and could not be installed independently. Consequently, users wishing to
use only Digital Photo Professional and EOS Capture were forced to install EOS
Viewer Utility also. To remedy this problem, EOS Capture has been upgraded in
version 1.1 so that it can be installed as a standalone application.
White balance compensation display/setting
5
Software Information
Shutter speed display/setting
Aperture value display/setting
ISO Speed display/setting
Image recording quality display/setting
Save destination display
AF mode display
Image rotation setting
Release button
Shots to Go display