Printing Using The Specified Print Cartridge Only (Lift Up) - Oki Pro1040 User Manual

Saving Toner When Printing

Printing Using the Specified Print Cartridge Only (Lift Up)

The lifespan of an unused print cartridge can be prolonged by separating it from the belt unit.
Setting combinations are shown in the table
below.
Print Color
Black (K) only
White* (W) only
Black + white*
Black, cyan, magenta,
yellow
Example: Printing using the CMYK Print Cartridge
only
In this example, the White* (W) Print Cartridge
is lifted up.
*: Supported by Pro1050 only.
1
Grasping the Top Cover Open Lever,
open the Top Cover.
2
Check the position of the unused print
cartridge via the label letters and color.
Print Cartridge to be
Lifted Up
Cyan, magenta, yellow,
white*
Black, cyan, magenta,
yellow
Cyan, magenta, yellow
White*
3
Turn the lift up lever on the print
cartridge that is not being used
clockwise to raise the print cartridge.
4
Close the top cover.
Note
z When closing the Top Cover, there is a risk of
pinching your fingers at the Top Cover support point
and Top Cover. Press the top of the Top Cover to
close it.
z When closing the Top Cover while grasping the LED
head, there is a risk of pinching your fingers or
hands. Press the top of the Top Cover to close it.
- 80 -