Printer Driver Functions Table; Explanation Of Functions; Windows Pcl Printer Driver Functions - Oki Pro1040 User Manual

Printer Driver Functions Table

⿟

Printer Driver Functions Table

This section explains the convenient functions when printing from a PC.
Reference
z For detailed explanations of the printer driver setup items, see "Online Help".

Explanation of Functions

Windows PCL Printer Driver Functions

[Setup] Tab
Item
Example Shows what printing results
will be based on current
settings. This example is just
an approximation and does not
indicate the exact actual number
of print pages and cut positions.
Paper settings Specifies, from among
registered paper settings,
which one should be applied for
printing.
Orientation Specifies the print orientation.
Copies Specifies the quantity to be printed.
Cut Mode Specifies the timing to cut roll paper
when cutting and printing on it.
Quality Specifies the resolution during
printing.
Screen Specifies the halftoning available
with the device.
User-defined Click when using the driver to
paper register paper settings to be
used for printing.
Paper interval Before printing to black mark or
detection die-cut labels, click to execute
learning on the device to
improve the print position before
starting.
Note that executing this function
will cause some paper to be used.
About Displays the printer driver
version information.
Default Restores default settings.
Description
[User-defined paper]
Item
Paper Name
Registered user-
defined paper
Size
Print position
correction
Cut position
correction
Media Form
Media Type
Media Weight
Sensor settings
Sensor
Adjustment
Printer
information
acquisition
- 48 -
Description
Enter the name of the paper
settings you want to register.
Shows a list of paper settings
that have been registered.
Specifies either millimeters
or inches as the unit for input
values.
Adjusts the print start position
on the paper edge.
Adjusts the cut position when
cutting and printing roll paper.
Specifies the paper setting type
to be registered.
Size input items change in
accordance with this setting.
Specifies the paper type.
Specifies the paper thickness.
Specifies the settings, from
among those registered on the
device, to be used for printing.
Click to calibrate the gap of
black mark or die-cut labels, and
register the results as device
sensor settings.
This button is not displayed for
media forms that do not require
calibration.
Obtains, from devices, the
names of settings registered as
sensor settings and the names
of user types registered as
paper types, and reflects them
in the sensor settings and paper
type list on the printer driver.