Chapter 12. E-map
Switch to "Professional" or "Advance" style and add E-map to primary or secondary toolbox.
Add image and camera to E-map; E-map could display camera's position and record status.
Double-click on camera icon and live preview division will switch to selected camera.
E-map Setting: Click "Setup"
Change Map: Click "Change Map" and select a map image from removable device.
Add Camera: Enable camera's check box and camera will display on left-top corner. Drag
camera to the current position on map.
Remove Camera: Disable camera's check box.
Rotate Camera: Right-click mouse button on camera icon.
Switch Live Preview: Double-click on camera icon.
H.265 36-Ch NVR with 8-bay Hard Disks
button on left-up corner to launch E-map setting dialog.
88
NVR-3685