Table of Contents
Advertisement
Rear Panel
Connector
USB (USB 3.0 x 1)
Reset
HDMI
VGA
e-SATA
LAN1/LAN2 (Fail over) 10/100/1000Mbps network.
I/O
Audio
AC-In
Power
Failover:
1. If both ports are connected to Ethernet, the system will adopt LAN1 first.
2. When LAN1 fails, the system will change to LAN2 automatically.
Description
For connecting USB stick to backup
Press and hold reset button to factory default
HDMI output
VGA output
Connect to e-SATA storage device
DI x 4 / DO x 4 (12V out, RS485 D+, RS485 D-, DI0~DI3, Ground,
DO0~DO3)
Audio out / Mic in
Switch current voltage with 115V or 230V
Switch to "I" for power on; switch to "O" for power off
19
H.265 36-Ch NVR with 8-bay Hard Disks
NVR-3685
Advertisement
Table of Contents
