Template Setting - Planet NVR-3685 User Manual

Auto setting could insert Intranet's cameras even these cameras are located behind several
switch hubs. Besides, you could directly insert cameras on NVR's switch hub and then click
the "Auto Setting"button to add them to system. Through "Auto Setting"function , you do not
need to key-in any network IP address or sub-mask parameter. All you need to do is click the
"Auto Setting"button to finish the job of inserting IP camera.

5.1.2 Template Setting

When you use "Auto Setting" or add a new camera, system will read the camera template from
"Template Setting" to fill out the camera parameter.
After the template has been confirmed, you will no longer need to set up parameter of camera
again in most cases. You could set up the quick template from camera setting page and only
need to set the camera's resolution and frames per second. If you need to set up more details
in template, please click the "Advanced" button to approach the template setting dialog.
Resolution The new camera will try to fit the selected resolution. When you select
"Max", the camera will adopt maximum resolution. If you select
another resolution, the system will choose a resolution for the
camera.
41
H.265 36-Ch NVR with 8-bay Hard Disks
NVR-3685