Table of Contents
Advertisement
7.3 Deleting Existing Event Schedule or Output
Action
Delete Event:
1. Select an Event from "Event List".
2. Click "Delete" button in the "Event List" below.
Delete Event Schedule:
1. Select an event from "Event List".
2. Select an event schedule from "Event Schedule List".
3. Click "Delete" button in the "Event Schedule List" below.
Delete Action:
1. Select an event from "Event List".
2. Select an event schedule from "Event Schedule List".
3. Select an Action from "Action List".
4. Click "Delete" button in the "Action List" below.
When Add/Modify/Delete is done, you must click "OK" button and then leave the
Event Setting page, otherwise all setting values will be rolled back.
7.4 Event Action Type
Buzzer
Digital Output
Buzzer works after event is triggered.
Select a device to change DO status after event is triggered.
Set output to "True", DO will change to "Close" status when alarm is
triggered.
Set output to "False"; DO will change to "Open" status when alarm is
triggered.
70
H.265 36-Ch NVR with 8-bay Hard Disks
NVR-3685
Advertisement
Table of Contents
