Table of Contents
Advertisement
Removing and Reseating the Pillows
You can remove the pillows for cleaning and maintenance quickly and easily. This method works for all types of
pillows. Grab the lower edge of the pillow with both hands firmly and pull up. As you do this, the pillow inserts will
pop out of the holes.
Reseat the pillows by aligning the pillow inserts with the holes and striking the pillow hard enough to insert the pegs
back into the holes.
Spa Cover
Important! Keep the spa covered when not in use!
•
Covered spas will use less electricity in maintaining
your set temperature.
Covering your spa will protect your spa's finish from
•
the sun's ultraviolet rays.
•
You are required to keep the spa covered to maintain
warranty coverage.
•
Covering your spa helps prevent children from
drowning in the spa.
See the manual enclosed with your cover for instructions
on mounting the locks and how to lock and unlock the
cover.
2008 Inground Spa Owner's Manual
LTR20081002, Rev. A
In addition, while the spa cover is rigid, it is not designed
to support any weight. Therefore, as a safety precaution
and to preserve the life of your cover, you must not sit,
stand, or lie on it; nor should you place objects of any
kind on top of it.
Waterfalls
Some spa series include optional waterfalls. When the
booster pump is on, turn the knob near the waterfall.
Water will immediately start flowing through it.
Operating Your Spa
Page 23
Advertisement
Table of Contents
