12.2 Remote Control Button
12.2.1 SET Button
To check remote control transmission code and store the transmission code to EEPROM
Press "Set" button for more than 10 seconds by using pointer.
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
12.2.2 RESET (RC) Button
To clear and restore the remote control setting to factory default.
Press once to clear the memory.
o
12.2.3 TIMER ▲
To change indoor unit indicators' intensity:
Press continuously for 5 seconds.
o
12.2.4 TIMER ▼
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds.
o
42