14. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
14.1 CS-MPS9SKH CS-MPS12SKH CS-MPS15SKH
14.1.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
14.1.1.1
To Remove Front Grille
14.1.1.2
To Remove Electronic Controller
2.
Remove 2 caps and 2 screws at the
bottom of discharge vane.
WARNING
3.
1.
Figure 1
Hook
Figure 2
74
Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
Lift to open the horizontal vane
gently.
4.
Remove the control
board cover by
releasing the hook.