SPECIFICATIONS
3.1
TABLE OF SPECIFICATIONS—TS32
Model
TS32 AC
TS32 WC
(I) Dimensions for enclosed model
(II) Consult factory.
3.2
COMPRESSOR SPECIFICATIONS
COMPRESSOR:
Type:
Configuration:
Bearing Type:
Cooling:
Lubricant:
Sump Capacity:
System Fluid Capacity:
Duty Pressure:
Control Type:
Options:
Section 3
Length
in
cm
Hz
50/60
154
392
50/60
154
392
NOTE
Noise levels vary with machine and enclo-
sure. For machine dBA output, consult
factory with machine serial number.
STANDARD MODELS:
Positive displacement, fluid-lubricated, twin rotary screws
Two-stage tandem, geared integral drive
Anti-friction
See Section 2.3
Pressurized fluid - see sections Section 3.4, Section 3.5 and Section 3.6
24 gallons/91 liters for 200/250HP, 35 gallons/ 132.5 liters for 300/350HP
Varies by cooling type - see Section 4.7
100-110 psig (6.9-7.6 bar), other pressures available
Spiral valve, Electro - pneumatic
24KT lubricant, Cold Weather Package, EES Remote Heat Recovery,
Enclosure, Phase Monitor Relay, Remote Air Cooler, Water Solenoid
Valve, Water Regulator Valve
TS32 USER MANUAL
DIMENSIONS (I)
Width
Height
in
cm
in
78
198
86
218
78
198
86
218
Weight
cm
(II)
(II)
27