Baby Lock Pro Line BL4-838D Instruction Book page 25

5. Clear the stitch fingers, and chain off the fabric.
6. Clip threads, leaving a 3 – 4" chain on fabric.
7. Gently pull the fabric to flatten the stitches.
8. Thread the chain through a large – eyed needle,
sew to back side of fabric and secure.
NOTE: If you find the fabric does not pull completely flat under the stitches, move the fold edge of the fabric
slightly back from the edge of the needle plate. This will allow threads to loop slightly off the edge of the fabric
and let the fabric pull completely flat.
9 – 5 Blind Hemming
It is possible to create a type of blindhem on your Baby Lock serger which will provide a sturdy finish for
sportswear, childrens wear and home decorator items.
1. Set the machine for two – thread sewing, stitch
width "5", stitch length "4".
2. Fold the fabric up along hemline and press in
place. Then fold back against the right side of
the garment to create a soft fold about ¼" from
the top edge of the hem.
3. Align hem under the presser foot and stitch,
allowing the needle to catch only a thread or
two of the soft fold; the knife will trim the top
edge of the hem.
4. Open the soft fold and press flat.
NOTE: Remove the left needle when Blindhem sewing.
An optional blindhemming foot is available through your Baby Lock dealer.
24
Downloaded from www.Manualsoncd.com