Brother DCP-L8400CDN Service Manual page 52

Error
Description
Codes
B000 The first or second side CIS flat
cable was detected to be not
inserted correctly.
B300 ---
B400 ---
B700 ---
B800 ---
B900 ---
BA00 ---
BB00 The white level value obtained
with function code 55 was
outside the specified range.
BC00 Though a fax was scanned
again after AC00 error, the
second side white or black
calibration data was not within
the normal range.
BD00 The black level value obtained
with function code 55 was
outside the specified range.
BE00 ---
BF00 The first side document
scanning position sensor
detected that the document was
400 mm or more in length and
could not be fed from the ADF in
duplex feeding.
C001 Timeout occurred with access
request sent to server due to
incorrect server address,
network disconnection, or
inactive server.
C002 User authentication is
unavailable due to incorrect user
name, incorrect password, or
asynchronous date and time
between the machine and
server.
C003 Access to a file is unavailable
due to incorrect directory name,
no write permission on directory,
file write lock, or no write
permission on file.
Refer Error
to: Codes
2-80 C004 The current time necessary for
user authentication is
unavailable due to time not
being obtained.
C700 The memory is insufficient to
expand the data of PC-Print.
C800 The memory used to store
secure print data exceeded the
memory size for secure print
data.
C900 ---
2-80 CA00 ---
D100 An error occurred during modem
initialization.
2-81 D200 The machine detected that the
modem PCB was disconnected.
D800 Error occurred during touch
panel initialization.
2-81 D900 Communication between the
panel PCB and main PCB is
unavailable during touch panel
initialization.
DA00 After the initialization of the
panel PCB, no response was
2-81
sent from the panel PCB for a
period of time.
DB00 USB communication between
the main PCB and panel PCB is
unavailable.
2-82 E000 Some ROM checksum error
occurred.
E100 Program error.
E400 The failed DIMM is installed, or
the DIMM is not installed
2-82
correctly.
E500 Error occurred when DRAM on
the main PCB ASSY was
accessed.
E600 Error occurred during writing to
2-82 EEPROM on the main PCB
ASSY.
2-22
Description
Confidential
Refer
to:
2-82
2-83
2-83
2-83
2-83
2-84
2-84
2-84
2-84
2-85
2-85
2-85
2-85
2-85