Brother DCP-L8400CDN Service Manual page 362

(14) Remove the Taptite cup S M3x6 SR screw and remove the T2 solenoid holder ASSY from
the T2 frame L unit.
(15) Remove the Gear 46 from the T2 frame L unit.
T2 frame L unit
T2 solenoid holder ASSY
Taptite cup S M3x6 SR
(16) Turn the T2 frame L unit upside down.
(17) Remove the two Taptite cup S M3x6 SR screws from the T2 beam front.
Taptite cup S M3x6 SR
T2 beam front
Gear 46
14
<Left side>
Fig. 3-293
Fig. 3-294
3-198
15
<Left side>
Confidential