Brother DCP-L8400CDN Service Manual page 284

Assembling Note:
When the Document scanner unit are replaced, be sure to fold and assemble the First side
CIS flat cable as shown in the figure.
■
A4 model
0 to 3
Surface of the Supporting plate
(Back side: Terminal surface)
140±1 mm
<To be connected to Main PCB>
■
Legal model
Surface of the Supporting plate
(Back side: Terminal surface)
Fold the flat cable at the
edge of the Supporting plate.
(10±1.5 mm)
113±1 mm
<To be connected to Main PCB>
Affix the tape on the
back side
(terminal side).
45°
45°
414±1 mm
Fig. 3-159
0 to 3
Affix the tape on the
back side
(terminal side).
45°
45°
471±1 mm
Fig. 3-160
3-120
40 mm
20 mm
20 mm
(10±1.5 mm)
39±1 mm
289±1 mm
40 mm
20 mm
20 mm
39±1 mm
317±1 mm
Fold down
Fold back
Surface of the Supporting plate
(Back side: Terminal surface)
Fold the flat cable at the
edge of the Supporting plate.
<To be connected to
First side CIS unit>
Fold down
Fold back
Surface of the Supporting plate
(Back side: Terminal surface)
Fold the flat cable at the edge
of the Supporting plate.
(10±1.5 mm)
<To be connected to
First side CIS unit>
Confidential