Wiring - Siemens SITRANS F Series Operating Instructions Manual

Electrical connection

5.1 Wiring

5.1 Wiring
Wire transducer cables and transmitter as follows:
1. Remove and keep the lid of the terminal box from the sensor.
Figure 5-1
2. Connect the 4 coaxial cables to the terminals 1B, 1A, 2B and 2A and the shields of the
coaxial cables
Figure 5-2
3. Tighten the cable glands to obtain optimum sealing. The gaskets must protrude along the
cable
Cable sealing, correct
22
Remove terminal box lid
Electrical connection, SONO 3300
Cable sealing, incorrect
Operating Instructions, 01/2010, SFIDK.PS.029.J4.02
SITRANS F US SONO 3300