Electrical connection
The following contains a short description of how to connect the sensor to the transmitter
SITRANS FUS060. For more information, please refer to the relevant Operating Instructions of
the transmitter.
Only qualified personnel may carry out work on the electrical connections.
Use in hazardous locations
Before opening the terminal box check that:
● No explosion hazard exists
● A fire department permission certificate has been issued
● All connection leads are potential free
Special requirements apply to the location and interconnection of sensor and transmitter.
See "Installation in hazardous area" (Page 8)
SITRANS F US SONO 3300
Operating Instructions, 01/2010, SFIDK.PS.029.J4.02
WARNING
WARNING
5
21