Omega Engineering DFG35 Series User Manual page 18

DFG35 Digital Force Gauges
LCD CONTRAST
Set Contrast
10
Press ENTER to modify the contrast. Select a value from 0 to 25, 25 producing the most contrast.
11.4 Tones
Audible tones can be enabled for all key presses and alerts, such as overload, set point value reached,
etc. The Set Point alert can be configured to be either a momentary tone or a continuous tone (until the
load is restored to a value between the set points). To configure the functions for which audible tones will
apply, select Tones from the menu. The screen will appear as follows:
TONES
Keys
* Alerts
Set Points
* Momentary
Continuous
11.5 Initial Mode
This section is used to configure the initial mode upon powering on the gauge. To access this parameter,
select Initial Mode from the menu. The screen will appear as follows:
INITIAL MODE
* Real Time
Peak Compression
Peak Tension
The default value is Real Time.
11.6 Information / Welcome Screen
The following screen is displayed at power up and can be accessed at any time by selecting Information
from the menu:
Digital Force Gauge
Series DFG35
Model No: DFG35-50
Serial No: 1234567
Version: 1.0
www.omega.com
User's Guide
17