Omega Engineering DFG35 Series User Manual page 16

DFG35 Digital Force Gauges
CALIBRATION
Units must be kgF.
Please try again
Press ENTER.
Displayed at the start of calibration if a disallowed unit is selected.
CALIBRATION
Load not stable.
Please try again.
Ensure that the load is not swinging, oscillating, or vibrating in any manner. Then try again.
CALIBRATION
COMPRESSION
Load too low.
Please try again.
The calibration weight does not match the set value.
CALIBRATION
TENSION
Load too close
to previous.
Please try again.
The entered calibration point is too close to the previous point.
User's Guide
15