Janome C30 Instruction Book page 31

b
!0
o
w
m
!0
.
!1
n
!0
,
!2
i
b Sew the left side up to the required length of the
buttonhole.
Stop the machine and press the reverse button.
w Start mark
o Required length
!0 Reverse button
n Start the sewing again. The machine will sew back to
the starting point.
Stop the machine when you are directly opposite the
start point. Press the reverse button.
!0 Reverse button
m Start the sewing again. The machine will sew the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point.
Press the reverse button.
, Start the sewing again. The machine will sew the rear
bartack and locking stitches, and stop automatically.
. Raise the presser foot lifter. Remove the fabric from
the machine and cut the sewing threads. Insert a pin
inside the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
i Presser foot lifter
!1 Pin
!2 Seam ripper
To sew the same size buttonhole, position the fabric
and start sewing again. The machine sews another
buttonhole identical to the first one then stops
automatically.
To sew the different size buttonhole, select the other
stitch pattern and select the memory buttonhole (#17)
again.
29