Table of Contents
Advertisement
Example C
TV
Other VCR (Player)
PERITEL
: Signal flow
How to connect to a stereo system (SLV-SE830B only)
Connect the
on the stereo system, using an audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the ENTREE LIGNE and SORTIE LIGNE jacks
of the other VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a PERITEL connector, use an adequate cable
instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the LIGNE-3 (DEC/EXT)*
(DEC/EXT)*
the display window.
1
*
SLV-SE830B only
*
2
SLV-SE730B, SE630B and SE230B only
PERITEL cable (not supplied)
LIGNE-2 G
D jacks on this VCR to the audio output jacks
t
o
2
connector, press CHOIX ENTREE to display "L3"*
Your VCR (Recorder)
LIGNE-3 (DEC/EXT)*
LIGNE-2 (DEC/EXT)*
1
or LIGNE-2
1
Connecting to a VCR or stereo system
1
or
2
or "L2"*
2
in
69
Advertisement
Table of Contents
