The Auto Set Up Function - Sony SLV-SE230B Operating Instructions Manual

Sony operating instructions video cassette recorder slv-se830b, slv-se730b, slv-se630b, slv-se230b
Table of Contents

Advertisement

To cancel the Auto Set Up function
Press MENU.
Notes
• Whenever you operate the Auto Set Up function, some of the settings
(ShowView*, timer, etc.) will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first
time after you purchase the VCR.
• If you want to use the Auto Set Up function again, press MENU, then press M/m/
</, to highlight INSTALLATION and press OK. Press M/m to highlight
INSTALLATION AUTO, then repeat all procedures from step 3.
• Auto preset can be performed by pressing x (stop) on the VCR continuously for 5
seconds or more with no tape inserted.
* not available on SLV-SE630B
20
Setting up the VCR with the Auto Set Up function

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slv-se630bSlv-se730bSlv-se830bSnowview slv-se230bSnowview slv-se830bSnowview slv-se730b ... Show all

Table of Contents