Step 3 : Connecting The Vcr - Sony SLV-N99 Operating Instructions Manual

Step 3 : Connecting the VCR

PERITEL
: Signal flow
1
2
3
Tip
• If your TV does not have a PERITEL connector, use the VMC-2106HG cable
instead and connect the cable to the line in jacks of your TV.
12
Connecting the VCR
IN FRONT ANT.
OUT TO TV
ANTENNE
ENTREE
Aerial cable (supplied)
PERITEL cable (supplied)
Disconnect the aerial cable from
your TV and connect it to IN
FRONT ANT. on the rear panel of
the VCR.
Connect OUT TO TV of the VCR
and the aerial input of your TV
using the supplied aerial cable.
Connect AV1 (EURO AV) on the
VCR and the PERITEL connector
on the TV with the supplied
PERITEL cable.
This connection improves picture
and sound quality. Whenever you
want to watch the VCR picture,
press t TV/MAGN to display
the VCR indicator in the display
window.
AV1
(EURO AV)