Hmi And Simotion Scout; Hmi And Simotion Scout Overview; Local Hmi Or Es On Simotion P320-4 - Siemens SIMOTION P320-4 E Manual

2.3

HMI and SIMOTION SCOUT

2.3.1

HMI and SIMOTION SCOUT Overview

The operational sequences on the SIMOTION P320-4 are either monitored via the HMI system
(Human Machine Interface) or the SIMOTION SCOUT engineering system.
The HMI or ES software can be connected using the following variants:
● Local (Page 31)
● via PROFINET (Page 32)
● via Ethernet (Page 33)
● via IsoPROFIBUS (optional) (Page 34)
Local communication of the HMI/ES
Only one local connection to the local SIMOTION Runtime is possible. If HMI or ES is also
installed locally, PC internal can access other controllers/devices via PROFINET / PROFIBUS.
See section Local HMI or ES on SIMOTION P320-4 (Page 31)
Communication of the HMI / ES via PROFINET / Ethernet / PROFIBUS
By using one of these communication variants, you can control and monitor several
SIMOTION devices.
2.3.2

Local HMI or ES on SIMOTION P320-4

For communication of the SIMOTION P320-4 with a local HMI or ES, the model described
below is used. The SIMOTION SCOUT engineering system or the HMI system can be installed
directly on the SIMOTION P320-4 S.
For this model, you must set the communication (access point) to PC internal. The
SIMOTION P320-4 is already configured for this communication variant at the time of delivery.
SIMOTION P320-4 E / P320-4 S
Manual, 01/2015
Description
2.3 HMI and SIMOTION SCOUT
31