Vertical Mounting - Siemens SIMOTION P320-4 E Manual

Mounting
1. Place the SIMOTION P320-4 and rail clip on the
upper edge of the standard profile rail at the po‐
sition shown.
2. Press the SIMOTION P320-4 slightly down‐
ward.
3. Once the rail clip slides over the bottom edge of
the standard mounting rail, push the device onto
the rail.
Ensure that you hear the SIMOTION P320-4
snapping into place.
Note
To ensure secure vertical mounting on standard mounting rails, install a standard rail ground
terminal beneath the device.
Removing
1. Press the SIMOTION P320-4 down until the rail clip releases the device.
2. Swing the SIMOTION P320-4 away from the standard mounting rail.
3. Lift the device up and off.
5.2.1.2

Vertical mounting

The fasteners and screws required are supplied with the device for the selected mounting
option.
Requirement
● 2 mounting brackets
● 4 screws
● 1 T20 screwdriver
SIMOTION P320-4 E / P320-4 S
Manual, 01/2015
Installation/mounting
5.2 Permissible mounting positions
67