Hmi And Simotion Scout; Hmi And Simotion Scout Overview; Local Hmi Or Es On Simotion P350-3 - Siemens SIMOTION P350-3 Manual

2.4

HMI and SIMOTION SCOUT

2.4.1

HMI and SIMOTION SCOUT Overview

Operational sequences on the SIMOTION P350-3 are generally monitored using the HMI
(Human Machine Interface) system or the SIMOTION SCOUT ES (Engineering System).
The HMI/ES software can be connected using the following methods:
● Local
● Via Ethernet
● Via PROFIBUS
● Via PROFINET
Local communication of the HMI/ES
Only a local connection to the local SIMOTION RT is possible. If HMI/ES RT is also installed
locally, "PC internal" can also be used to access other controllers via the IsoPROFIBUS
board.
Communication of the HMI/ES via Ethernet / PROFIBUS / PROFINET
Several SIMOTION devices can be controlled and monitored with a single installation.
2.4.2

Local HMI or ES on SIMOTION P350-3

This model is relevant for SIMOTION P-specific communication with a local HMI/ES. The
SIMOTION SCOUT Engineering System or the HMI system is installed directly on the
SIMOTION P350-3.
For this model, set the communication (access point) to "PC internal". The
SIMOTION P350-3 is delivered already configured for this communication variant.
Figure 2-4
SIMOTION P350-3 and Panels
Manual, 05/2009
Model: Local HMI
Description
2.4 HMI and SIMOTION SCOUT
21