Sony MSW-M2100 Operation Manual page 88

8-4 Items in the Extended Setup Menu
Menu items in the range 800 to 899, relating to audio control (Continued)
Item number Item name
827 AES OUT SEL
Sub-item
1 CH1/CH2
2 CH3/CH4
828 SDI OUT SEL
Sub-item
1 CH1/CH2
2 CH3/CH4
829 SDTI OUT SEL
Sub-item
1 CH1/CH2
2 CH3/CH4
8-18
Chapter 8 Setup Menus
Settings
Select the audio signals to assign to AES/EBU audio output channels.
APPI-DSP software Version 0.90 or higher is required to display this menu item.
Note
Check to be sure that the selected tracks are being output from the AES/EBU
OUTPUT connectors.
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
Select the audio signals to assign to SDI audio output channels.
The HD-SDI OUTPUT connector of the UP-CONTROL option also follows this
menu item.
Note
Check to be sure that the selected tracks are being output from the SDI OUTPUT
connectors.
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
Select the audio signals to assign to SDTI audio output channels.
Settings for SDTI CH5 to CH8 SEL are impossible for hardware reasons. DIF-
FPGA change is required.
This menu item applies when APR Board-14 or higher is installed.
Note
Check to be sure that the selected tracks are being output from the SDTI
OUTPUT connectors.
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.