Sony MSW-M2100 Operation Manual page 78

8-4 Items in the Extended Setup Menu
Menu items in the range 100 to 199, relating to the control panels (Continued)
Item number Item name
111 TSO PLAY
115 PHASE LOCK IN
VARIABLE X3
116 JOG DIAL RESPONSE
117 CONTROL PANEL
SELECTION
a)
Speed
TYPE 2
FWD
+3
(reverse)
+1
Rotation rate
RVS
FWD
-1
(forward)
-3
RVS
8-8
Chapter 8 Setup Menus
Settings
Select whether or not to enable tape speed override mode.
DIS : Disable tape speed override mode.
TSO: Enable tape speed override mode.
FFED: Enable feed play mode.
Select whether or not to lock the capstan phase in ×3 variable speed play mode
when playing back a Betacam or Betacam SP cassette.
OFF : Do not lock.
ON: Lock.
Select the tape speed characteristics for the search dial rotation rate (VTR
commands).
TYPE1 : Tape speed varies linearly over the range –1 to +1.
TYPE2: Tape speed varies stepwise as shown in the figure below
range –3 to +3. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the search dial rotation rate)
TYPE3: Tape speed varies linearly over the range –3 to +3, as shown in the
figure below b) .
TYPE4: Tape speed varies stepwise as shown in the figure below
range –2 to +2. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the search dial rotation rate)
Select the control panel function when the PANEL SELECT switch on the switch
panel is set to REAR.
SW : Only the control panel connected to the CONTROL PANEL connector on
the connector panel functions.
PARA : The control panels connected to the CONTROL PANEL connectors on
the switch panel and connector panel both function.
b)
Speed
TYPE 3
FWD
+3
Rotation rate
RVS
FWD
-3
RVS
c)
Speed
TYPE 4
FWD
+2
+1
Rotation rate
RVS
FWD
-1
-2
RVS
a)
over the
c) over the
(Continued)