Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 99

Viewing images recorded on
tapes on your computer
(Windows user only)
(4) Follow the on-screen messages to install the
USB driver.
(5) Set the USB MODE switch to VCR. (The
default setting is VCR.)
(6) Connect the AC power adaptor to your VCR
and then to a wall outlet (wall socket).
(7) Set the POWER switch to ON.
(8) With the CD-ROM inserted, connect the
(USB) jack on your VCR to the USB
connector on your computer using the
supplied USB cable.
Your computer recognizes the VCR, and the
Windows Add Hardware Wizard starts.
(9) Follow the on-screen messages so that the
Add Hardware Wizard recognizes that the
USB drivers have been installed. The Add
Hardware Wizard starts three times because
three different USB drivers are installed. Be
sure to allow the installation to complete
without interrupting it.
If the "Files Needed" screen appears
(Windows 2000 Professional and Windows XP
users)
Set the CD-ROM on the CD-ROM driver then
select "Browse...." t "My Computer" t
"ImageMixer" t "sonyhcb.sys", and click the
"OK" button.
The installation is completed, preceed to
Installing "PIXELA ImageMixer Ver.1.0 for
Sony" on page 102.
USB connector/
USB cable (supplied)/
(4)
(5)
(6)
(7)
(8)
(USB) jack/
(9)
t t t
99